OEMfibers 10G SFP + DAC high-speed cable and 10G SFP + optical module
نوشته شده توسط : ewr

When the info center network can be upgraded to 10G, it's important to consider whether to select optical fiber or copper cable in the integrated wiring. Then, is it possible to choose 10G SFP + DAC high-speed cable and 10G SFP + optical module?

Comprehensive wiring selection 10G SFP + DAC high-speed cable and 10G SFP + optical module

The 10G SFP + optical module is an SFP + package and a duplex LC interface optical module. It is generally used in combination with an LC interface fiber jumper, which is principally used for optical fiber wiring. Provide each 10G Ethernet connection, the transmission wavelength is 850nm, 1310nm or 1550nm. In the communication room, the rack server and rack switch are wired. If the length is higher than 15M, it could be attained by selecting multimode fiber optical module, usually 10G LC fiber The jumper is certainly connected to the 10G SFP + optical module; if the vertical distance between your two will not exceed the cabinet, the SFP + DAC can be utilized for connection. For that reason, the 10G SFP + optical module is normally more trusted in long-distance transmission.

10G SFP + DAC is a copper cable with SFP + connectors at both ends. Weighed against 10G SFP + optical modules, the price is leaner, the wiring flexibility can be higher, the transmission distance can reach 10 meters, and the procedure is less complicated in the actual construction process. , 10G SFP + DAC wiring saves connection equipment, without the utilization of patch panels, servers and network equipment could be directly linked to the TOR switch, which indirectly saves investment costs.

10G SFP + DAC is a commonly used optical device for top-of-rack cabling in data centers, used for connecting small access switches and servers. 10G SFP + high-speed cable is a low-cost solution to displace optical modules. It is utilized to achieve high-speed interconnection at short distances and gets the characteristics of low power consumption and low latency.

Beneath the development trend of data centers, SFP + technology can assure the cheapest latency and best performance in the data center. When the cable deployment in the info center increases from 1000 to 10,000, 10G SFP + to SFP + high-speed cable solution It really is predicated on SFP + MSA (multi- source process), using copper shaft cables with SFP + connectors at both ends to supply a 10 Gigabit Ethernet connection between two network devices. 10G SFP + DAC can be an integrated SFP + connector and copper cable, which really is a low-loss, high-efficiency, energy-saving and low-cost interconnection solution. 10G SFP + DAC high-speed cables can be found in a number of lengths and can be selected up to 15m, which happens to be the very best cable choice for 10 Gigabit Ethernet connections. Now let's make it simple for everybody. The first choice for short-distance transmission in 10G data centers is usually 10G SFP + high-speed cables, accompanied by 10G SFP + optical modules .Read even more:https://www.oemfibers.com

:: بازدید از این مطلب : 21
امتیاز مطلب : 0
تعداد امتیازدهندگان : 0
مجموع امتیاز : 0
تاریخ انتشار : جمعه 5 ارديبهشت 1399 | نظرات ()
مطالب مرتبط با این پست
می توانید دیدگاه خود را بنویسید

آدرس ایمیل
وب سایت/بلاگ
:) :( ;) :D
;)) :X :? :P
:* =(( :O };-
:B /:) =DD :S
-) :-(( :-| :-))
نظر خصوصی

 کد را وارد نمایید:

آپلود عکس دلخواه: