The 40-Gigabit QSFP+ transceiver module is normally a hot-swappable, parallel fiber-optical module with four independent optical transmit and receive channels. These channels can terminate in another 40G QSFP+ transceiver , or the channels can be broken out to four separate 10-Gigabit SFP+ transceivers. The QSFP+ transceiver module connects the electrical circuitry of the system with either a copper or an optical external network.
10GBASE X2 modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.
Difference between QSFP+ and X2
1.QSFP+ MSA, SFF-8436 compatible
2.Four independently addressable transmit and receive channels
3.Highly compact: savings of 60% on edge and board use compared to four comparable SFP+ modules
5.XFP-like latch mechanism for ease-of-insertion
6.Digital Diagnostics Monitoring Interface. allows customer management and monitoring of key modules parameters, analogous to SFP+
7.Optical connectivity via industry standard MPO/MTP terminated fiber ribbon
1.Compatible with SENPAK MSA Rev 3.0
2.Support of IEEE 802.3ae 10GBASE-L
3.XENPAK MSA package with duplex LC connector
4.With Digital Diagnostic Monitor Interface
5.Operating temperature range 0 to 70 degrees Celsius
6.Hot Pluggable 70-PIN Connector with XAUI Electrical Interface
The QSFP+ transceiver can be used primarily in short reach applications in switches, routers, and data centre equipment where it provides higher density than QSFP+ modules . The X2 offer customers a multitude of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and company transport applications.
:: بازدید از این مطلب : 13
امتیاز مطلب : 0
تعداد امتیازدهندگان : 0
مجموع امتیاز : 0
تاریخ انتشار : چهار شنبه 24 ارديبهشت 1399 |