The Cisco 10GBASE SFP+ modules provide you with a wide selection of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service agency transport applications

Features and benefits

Cisco SFP+ modules provide following features and benefits

1.Industry’s smallest 10G form factor for greatest density per chassis

2.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (you don't need to power down if installing or replacing)

3. Supports “pay-as-you-populate” model for investment protection and simple technology migration

4.Digital optical monitoring capability for strong diagnostic capabilities

5.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on a single link

6.Cisco quality Identification (ID) feature allows a Cisco platform to recognize if the module is certified and tested by Cisco

Cisco SFP-10G-SR-S module (S-Class)

The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does not support FCoE

Cisco SFP-10G-SR module

The Cisco 10GBASE-SR Module supports a web link amount of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible

Cisco SFP-10G-SR-X module

The Cisco SFP-10G-SR-X is a multirate* 10GBASE-SR, 10GBASE-SW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible

Cisco SFP-10G-LRM module

The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade Multimode Fiber (MMF). To make sure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter ought to be coupled through a mode conditioning patch cord. No mode conditioning patch cord is necessary for applications over OM3 or OM4

The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard Single-Mode Fiber (SMF, G.652)

Cisco SFP-10G-LR-S module (S-Class)

The Cisco 10GBASE-LR module supports a web link amount of 10 kilometers on standard Single-Mode Fiber (SMF) (G.652). SFP-10G-LR-S will not support FCoE

Cisco SFP-10G-LR module

The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652)

Cisco SFP-10G-LR-X module

The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a web link amount of 10 kilometers on standard Single-Mode Fiber (SMF, G.652)

Cisco SFP-10G-ER-S module (S-Class)

The Cisco 10GBASE-ER module supports a link length of up to 40 kilometers on SMF (G.652). SFP-10G-ER-S does not support FCoE

Cisco SFP-10G-ER module

The Cisco 10GBASE-ER Module supports a web link amount of up to 40 kilometers on standard Single-Mode Fiber (SMF, G.652)

Cisco SFP-10G-ZR-S module (S-Class)

The Cisco 10GBASE-ZR module supports link lengths of up to about 80 kilometers on standard SMF (G.652). This interface is not specified as part of the 10 Gigabit Ethernet standards and is, instead, built according to Cisco specifications. SFP-10G-ZR-S will not support FCoE

Cisco SFP-10G-ZR module

The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths as high as about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface isn't specified within the 10 Gigabit Ethernet standard and is usually instead built according to Cisco specifications.Learn:www.oemfibers.com